avrdude.exe : Version 5.11, compiled on Sep 2 2011 at 19:38:36
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch
System wide configuration file is "D:\WinAVR-20100110\bin\avrdude.conf"
Using Port : lpt1
Using Programmer : usbasp
avrdude.exe : seen device from vendor ->www.fischl.de<-
avrdude.exe : seen product ->USBasp<-
AVR Part : ATMEGA328P
Chip Erase delay : 9000 us
PAGEL : PD7
BS2 : PC2
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom 65 5 4 0 no 1024 4 0 3600 3600 0xff 0xff
flash 65 6 128 0 yes 32768 128 256 4500 4500 0xff 0xff
lfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
hfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
efuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
lock 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
Programmer Type : usbasp
Description : USBasp, http://www.fischl.de/usbasp/
avrdude.exe : auto set sck period (because given equals null)
avrdude.exe : warning: cannot set sck period. please check for usbasp firmware update.
avrdude.exe : AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude.exe : Device signature = 0x1e950f
avrdude.exe : safemode: lfuse reads as FF
avrdude.exe : safemode: hfuse reads as D7
avrdude.exe : safemode: efuse reads as 7
avrdude.exe : reading input file "C:\Users\js\Documents\Atmel Studio\_AVR\LCDMenu_0_Uno\LCDMenu\Debug\LCDMenuUnoPWM.hex"
avrdude.exe : writing flash (7774 bytes):
Writing | ################################################## | 100% 6.68s
avrdude.exe : 7774 bytes of flash written
avrdude.exe : verifying flash memory against C:\Users\js\Documents\Atmel Studio\_AVR\LCDMenu_0_Uno\LCDMenu\Debug\LCDMenuUnoPWM.hex:
avrdude.exe : load data flash data from input file C:\Users\js\Documents\Atmel Studio\_AVR\LCDMenu_0_Uno\LCDMenu\Debug\LCDMenuUnoPWM.hex:
avrdude.exe : input file C:\Users\js\Documents\Atmel Studio\_AVR\LCDMenu_0_Uno\LCDMenu\Debug\LCDMenuUnoPWM.hex contains 7774 bytes
avrdude.exe : reading on-chip flash data:
Reading | ################################################## | 100% 4.29s
avrdude.exe : verifying ...
avrdude.exe : 7774 bytes of flash verified
avrdude.exe : safemode: lfuse reads as FF
avrdude.exe : safemode: hfuse reads as D7
avrdude.exe : safemode: efuse reads as 7
avrdude.exe : safemode: Fuses OK
avrdude.exe done. Thank you.