The DigiX has a 32-bit 84 MHz MCU, embedded low power Wi-Fi (b/g/n), mesh networking support, 99 usable i/o pins, audio output, USB on the go support, onboard EEPROM, on-board microSD slot, built in real time clock, and is 100% compatible with anything that works with the Arduino Due - no adapters, code changes, or special software needed! This is the ultimate Arduino compatible development board, ready for any project!

Here are the specifications:

-84 MHz Clock Speed
-32-bit ARM Processor (AT91SAM3X8E)
-On board 802.11b/g/n WiFi Module (FCC/CE Approved)
-On board MicroSD slot
-On board 4KB (32kbit) EEPROM
-nRF24L01+ wireless module socket (not included)
-3.3V, 3.4-5.5V (LiPo Ready), 5V, or 6-16V input (onboard buck regulator)
-512KB Flash
-1A @ 3.3V and 1A @ 5V Available (when powered at 5V+)
-99 I/O Pins
-12 PWM
-12 Analog Input
-2 Analog Output (DAC)
-Onboard LED (connected to Pin 13)
-130ma Total Current Output from Processor

The DigiX - like the Arduino Due, UDOO, and Spark Core runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Connecting the I/O pins to higher voltages, including 5V, could damage the DigiX.


Arduino DUE